First, the principle of CNC lathes running from the middle program segment

CNC lathe is a kind of advanced processing equipment, different from ordinary lathe, it does not need manual operation, only need to pre-write the processing program, and then the CNC system automatically controls the lathe for processing. In actual production, if you need to run from the middle program segment, you need to modify the code after writing the entire program, and then readjust the machining center, and finally complete the operation from the middle program segment.

Second, the operation steps of the CNC lathe from the middle program segment to run

1. Write the entire processing program

First of all, it is necessary to plan the entire processing process and write a complete processing program. The program should be written line by line according to the processing steps, and ensure the correctness of the program.

2. Modify the program code

If you need to run from the intermediate program segment, you need to modify the program code. Specifically, you need to find the program segment that needs to be run from the entire processor and mark it as a starting point. In the numerical control system can be modified through the program editing function.

3. Reposition the machining origin

After the program is written and modified, the processing origin needs to be reset to ensure the safety and accuracy of processing from the middle program segment.

4. Run the program

After modifying the program code and repositioning the processing origin, you can start running from the intermediate program segment. At this time, the CNC lathe will automatically find the marked starting point to execute the program.

To sum up, CNC lathes can run from the middle program segment, but at the same time need to consider safety issues and machining accuracy. In order to achieve this operation, it is also necessary to modify the program and relocate the machining origin.