First of all, we need to understand the structure of the double-column CNC vertical lathe, which will help us better understand the importance of cleaning work.
A double-column CNC vertical lathe usually consists of a bed, a spindle box, a spindle, a worktable, a feed system, a tool rest, etc. Among them, the bed is the support part of the entire lathe, the spindle box and spindle are the core components of the lathe, responsible for rotating the tool for processing, the workbench is used to clamp the workpiece, and the feed system is used to control the movement of the tool holder. part.
Cleaning work mainly focuses on the bed, spindle box, spindle and workbench, etc., and they must be clean, tidy and dust-free. Because during the processing process, various debris, chips, oil stains, etc. will fall on the lathe. If not cleaned in time, it will affect the service life and processing quality of the lathe.
Below, we will explain how to perform cleaning work from many aspects.
First of all, you need to use specific tools when cleaning the lathe, such as soft brushes, metal brushes, rags, etc. Be careful when using the brush and do not brush too hard to avoid scratching the surface of the lathe. When using a rag, wipe gently and do not use too much force.
Secondly, when cleaning the lathe, different parts need to be considered. For example, the bed bed needs to pay attention to the cleaning of the bed surface, sides and bottom. Especially the corners are prone to dust accumulation and need to be paid attention to. The spindle box and spindle need to be wiped clean to avoid impurities such as oil stains and metal chips from adhering. On the workbench, attention needs to be paid to the interior and fixture surfaces to avoid accumulation of oil stains and chips.
Again, you need to pay attention to the cycles of different cleaning tasks. On weekdays, the lathe can be cleaned once a week and thoroughly cleaned once a week, depending on the usage of the lathe. In addition, you also need to always pay attention to cleaning the lathe surface during processing.
Finally, when cleaning the lathe, you only need to wash it. There is no need to use chemicals to avoid damage to the lathe.
To sum up, for the cleaning work of the double-column CNC vertical lathe, we need to carry out gentle and thorough cleaning according to different parts to ensure the service life and processing effect of the lathe. At the same time, it is also important to pay attention to different cleaning cycles and cleaning methods.