CNC vertical lathe is an industrial machinery equipment that is often used for turning and machining mechanical parts. It is very important to clean and maintain the CNC vertical lathe, which can make its performance long-lasting and stable. So, how should the CNC vertical lathe be cleaned?
First of all, we need to place protective plates on countertops and other places that are prone to contamination to prevent tools, knives, and clamps from falling into corners that cannot be cleaned. In addition, when cleaning and maintaining machine tools, you need to follow the arrangements and guidance of dedicated personnel.
After each use of the CNC vertical lathe, debris and oil stains on the drum bed, bed, plate top, etc. need to be cleaned. During the cleaning process, we should pay attention to the following points:
1. Never use brushes containing acids, alkalis or large particles of metal to clean the machine surface.
2. Need to wipe with soft cloth to reduce scratches and damage.
3. Do not use compressed air to blow away any lubricating oil or other particles during the cleaning process to prevent these substances from splashing onto the mechanical parts or bearings of the machine tool.
4. Maintain a negative pressure environment in the machine tool to prevent debris in the protective cover from falling into the machine tool, and lubricating oil and cutting fluids can also be easily inhaled.
5. Do not use cleaning agents containing foaming atomized powders or sprays.
After the cleaning process is complete, the machine tool needs to be lubricated. Adding lubricating oil and cutting fluid to the machine tool in a reasonable, quantitative and timely manner can not only extend the service life of the machine tool, but also reduce friction, wear and noise during the machining process.
During daily maintenance and cleaning, if you encounter a fault that cannot be solved by yourself, please consult professional service personnel in time to avoid damaging the machine tool and machine tool parts.
Although the cleaning and maintenance process of CNC vertical lathe is relatively tedious, it is very important to maintain the long-lasting performance and stable operation of the machine tool. Therefore, it is necessary to understand and master relevant maintenance knowledge before and during daily use and perform maintenance and cleaning according to the instructions to increase the service life of the machine tool and ensure accuracy and efficiency.