Dealing with problems in CNC lathe processing requires taking corresponding measures according to the specific situation. Here are some common problems and their possible solutions:

1. Insufficient processing accuracy:

Adjust the cutter: Make sure you are using the right cutter and check for wear. Adjust cutting parameters and tool radius to improve machining accuracy.

Check the fixture: Make sure the workpiece is held firmly to avoid vibration and deformation.

2. Poor surface quality:

Choose the right tool and cutting speed: Use the right tool and cutting speed to ensure you get the ideal surface finish.

Check coolant: Make sure there is an adequate supply of coolant to prevent overheating and improve cutting results.

3. Size deviation:

Calibrate the CNC system: Check the parameters and calibration of the CNC system to ensure its accuracy.

Check tool wear: Check tool wear regularly and replace severely worn tools in a timely manner.

4. Processing vibration:

Adjust the feed speed: Adjust the feed speed appropriately to avoid vibration caused by too fast or too slow.

Strengthen rigid support: Ensure rigid support of the workpiece and tool to reduce the impact of vibration.

5. Tool damage:

Check tool fixation: Make sure the tool is properly seated to avoid damage due to loose tools.

Choose the right tool: Choose the right tool according to the processing requirements to prevent excessive stress on the tool.

6.Program error:

Check the CNC program: Review the CNC program to ensure its correctness. Correct possible errors or inaccurate instructions.

7. Low processing efficiency:

Optimize cutting parameters: Adjust cutting parameters to improve processing efficiency while ensuring processing quality.

Consider automation: Consider introducing automated equipment such as automatic tool changing systems and automatic measurement systems to improve production efficiency.

When solving a problem, it is important to carefully analyze the situation, which may require experimentation, testing, and system inspections to find the root cause of the problem. In addition, regular maintenance and upkeep of CNC lathe equipment to ensure its normal operation is also the key to preventing problems.