CNC vertical lathes are easily affected by moisture, corrosive gases and other factors in the working environment. Therefore, anti-corrosion work on CNC vertical lathes is very important to extend the service life of the machine tool and maintain its good operating condition. The following are some common methods for CNC vertical lathes to perform anti-corrosion work:

1. Surface coating treatment: Anti-corrosion coating treatment on the outer surface of CNC vertical lathe is a common method. The CNC vertical lathe can be sprayed or painted with anti-corrosion paint, and corrosion-resistant and wear-resistant coatings can be selected to protect the surface of the CNC vertical lathe from oxidation and corrosion.

2. Keep it dry and clean: Keeping the working environment of CNC vertical lathe dry and clean is an important measure to prevent corrosion. CNC vertical lathes regularly clean the surface of the machine tool to remove accumulated water, oil and dust on the surface in a timely manner to avoid moisture staying for a long time.

3. Protective cover and closed design: Add protective covers or closed designs for key components or sensitive parts of the CNC vertical lathe. The CNC vertical lathe can effectively prevent the erosion of moisture and corrosive gases. These protective covers can protect the transmission system, electrical components and other components inside the machine tool from corrosion.

4. Coolant management: For the coolant used in CNC vertical lathes, regularly check its concentration, cleanliness and PH value to keep the quality of the coolant stable. Expired coolant in CNC vertical lathes may produce corrosive substances, affecting the service life of the machine tool.

5. Regular lubrication: Regularly inspect and maintain the lubrication system of the CNC vertical lathe to ensure the quality of the CNC vertical lathe lubricating oil and the normal operation of the lubrication system. Good lubrication can reduce friction between machine tool parts and prevent corrosion caused by friction.

6. Environmental control: If the CNC vertical lathe conditions permit, you can consider establishing an environmental control system around the CNC vertical lathe to control temperature and humidity to prevent the CNC vertical lathe from being in a humid and high-humidity environment for a long time.

7. Regular inspection and maintenance: Regular inspection and maintenance of CNC vertical lathe is an important means to prevent corrosion. Discover and repair possible problems with CNC vertical lathes in a timely manner to prevent them from getting worse.

Through the above methods, the CNC vertical lathe can effectively protect the CNC vertical lathe from the effects of corrosion, extend its service life, and maintain its good working condition.