The installation of a CNC vertical lathe is a relatively complex process that requires following a series of steps and precautions. The following is the general installation method of CNC vertical lathe:

1. Choose a suitable installation site: Choose an appropriate site for installing the CNC vertical lathe, ensure that the site has sufficient space and load-bearing capacity, and meets the environmental requirements for machine tool installation.
2. Prepare the foundation: Build a solid foundation according to the size and weight requirements of the CNC vertical lathe to ensure the stability of the machine tool. The foundation should comply with the design requirements and recommendations provided by the machine tool manufacturer.
3. Transportation and positioning: Transport the CNC vertical lathe to the installation site, and use appropriate lifting equipment to position the machine tool on the foundation. During the positioning process, ensure the level and verticality of the machine tool.
4. Install the machine tool body: According to the installation instructions provided by the machine tool manufacturer, install various components of the CNC vertical lathe, including the bed, spindle, turret, workbench, etc. Follow the correct sequence and steps for assembly, using appropriate fasteners and tools.
5. Connect hydraulic, pneumatic and electrical systems: Connect the hydraulic, pneumatic and electrical systems of machine tools, including oil pipes, air pipes, cables, etc. Ensure the correctness and reliability of connections, and perform testing and debugging as required.
6. Debugging and calibration: debug and calibrate the installed CNC vertical lathe, including motion system, sensors, tool measurement, etc. According to the calibration procedures provided by the machine tool manufacturer, adjust and calibrate various parameters of the machine tool to ensure accurate and stable operation of the machine tool.
7. Install accessories and auxiliary equipment: As needed, install and connect accessories and auxiliary equipment of the CNC vertical lathe, such as cutting fluid supply system, cooling system, tool library, etc.
8. Safety inspection and training: After the installation is completed, conduct a safety inspection of the machine tool to ensure that the machine tool meets safety requirements. At the same time, operators are trained to teach correct machine tool operation methods and safety precautions.

These are the general installation methods of CNC vertical lathes. The specific installation steps may vary according to the machine tool model and manufacturer's requirements. Therefore, before installing a CNC vertical lathe, it is recommended to carefully read the installation manual of the machine tool and the guidance provided by the manufacturer to ensure that the installation process is completed correctly and safely.