CNC vertical lathe is a machine tool used for metal processing. The operation method and emergency measures are crucial to the safety of the operator. The following is popular science on the operation methods of CNC vertical lathes and emergency measures in the event of mechanical injury:

CNC vertical lathe operation method:

1. Start preparation:

Check whether all parts of the CNC vertical lathe are firmly installed and well lubricated.

Ensure that the CNC vertical lathe tool is installed correctly and the workpiece is held securely.

Check whether the CNC vertical lathe control system is normal and confirm whether the program is ready.

2.Set processing parameters:

CNC vertical lathes set processing parameters such as cutting speed, feed speed and cutting depth according to the workpiece material and processing requirements.

Ensure that the CNC vertical lathe processing program path is reasonable and safe.

3. Start the machine:

Start the CNC vertical lathe according to the instructions in the operation manual, and pay attention to see whether all parts are operating normally.

4. Monitor the processing process:

During the CNC vertical lathe processing process, the cutting situation is observed in time to ensure processing quality and safety.

Regularly check the wear of CNC vertical lathe tools and replace them in time.

5. End processing:

After the CNC vertical lathe is completed, shut down the machine tool in time and clean the work surface and work area.

After the machine is shut down, information such as processing parameters and workpiece dimensions should be recorded in a timely manner.

Emergency measures in the event of mechanical injury:

1. Shutdown:

When mechanical damage occurs to a CNC vertical lathe, first stop the machine tool immediately and press the emergency stop button or emergency brake button.

2. Emergency help:

In the event of an emergency on the CNC vertical lathe, promptly send a help signal to the surrounding people or staff for help.

3. First aid treatment:

Provide first aid treatment to the injured, such as stopping bleeding, bandaging, etc., to ensure the safety of the injured.

4. Alarm notification:

Report the incident to the on-site supervisor or safety personnel and trigger the relevant alarm system.

5. Accident investigation and recording:

Investigate CNC vertical lathe accidents, understand the cause of the accident, and take measures to avoid recurrence.

Record the accident process and the status of the injured for subsequent processing and improvement of safety management measures.

CNC vertical lathes must be operated by professionally trained and certified operators. Operators must operate in strict accordance with operating procedures and safety standards to ensure the safety of themselves and others.