1. Preparation before adjustment

Before formally adjusting the level of the CNC lathe bed, the following preparations need to be made:

1. Stop the machine and unplug the power cord to ensure safe operation;

2. Prepare a level with high precision and an adjusting tool, such as a screwdriver.

3. Clean the inclined bed surface of the machine tool for better observation and adjustment.

Second, level adjustment steps

The horizontal adjustment steps of the inclined bed of the CNC lathe are as follows:

1. The first step is to find the center line of the inclined bed, which can be found using professional measuring tools or intuitive visual method, and it is necessary to ensure that the center line is accurate;

2. The second step is to find the horizontal plane on the inclined bed. There are two main methods that can be used: one is to measure directly with a level, and the other is to use tools such as an iron ruler to compare the difference between the two points;

3. The third step is to adjust the level of the inclined bed by adjusting the screws, first of all, you need to find two areas with a relatively large height difference, generally at both ends, and then adjust the screws that directly affect the two areas, fine tune until the height of the two ends is equal;

4. The fourth step is to check the level of the entire inclined bed again, and if there are still uneven, you can continue to fine-tune until you are satisfied.

Third, precautions

In the horizontal adjustment of CNC lathe inclined bed, the following points need to be noted:

1. Adjust the screws gently to avoid excessive damage;

2. Clamp the locking nut during adjustment to prevent the screw from loosening after adjustment;

3. After adjustment, it is necessary to check the level of the inclined bed again to ensure that the adjustment effect meets the requirements.

In short, although the horizontal adjustment of the inclined bed of the CNC lathe seems simple, it needs to be carefully operated in order to achieve the ideal effect. Only after many times of practice and try, can we really master this skill.