What are the details that need to be paid attention to when using a vertical lathe? This is a problem that every worker who uses a lathe should understand, because the neglect of a small detail may lead to the failure of the entire work. In this article, we will explain the details to pay attention to when using a vertical lathe and their solutions.

1. Keep the lathe clean
First of all, it is very important to keep the lathe clean. When operating a lathe, a large amount of metal shavings and oil stains will inevitably be produced, which will have a negative impact on the operation of the lathe. Therefore, make sure the surface of the machine is clean before operating the lathe, and perform regular maintenance and cleaning as needed.

2.Safe operation
Safe operation is an issue that cannot be ignored when using a vertical lathe. When operating a lathe, certain principles and specifications should be followed, such as checking whether the tool is installed correctly before use, adjusting the speed and cutting depth of the lathe, and operating soberly. If a malfunction occurs, stop the machine immediately and seek professional repair help.

3. Control of cutting depth
Control of cutting depth is very critical in the operation of vertical lathes. If you cut too deep, it will damage the tool and workpiece, and even cause machine failure. Therefore, when processing, the cutting depth must be controlled and not exceed the limit that the lathe can withstand.

4. Correct posture when using a knife
The correct tool posture is also an issue that must be paid attention to when using a vertical lathe. If the tool is placed incorrectly, it will lead to problems such as reduced cutting quality and damage to the workpiece. When using a lathe, be sure to pay attention to how the cutting tool is installed and make sure it is in the correct position and angle.

5. Reasonable material selection
Finally, material selection is also something you need to pay attention to when using a vertical lathe. Different materials have different properties, so it is very important to choose the right material for processing. Before processing, you should first understand the material and physical properties of the workpiece, and choose appropriate tools and processing methods based on the hardness, toughness and other factors of the material.

Summarize:
Before using a vertical lathe, you must pay attention to the above five details. Only by strictly following the operating specifications can the lathe work properly and ensure the quality and efficiency of processing. In this process, you must also continue to learn and explore to improve your processing level and skills in using lathes.