There are many things to note when using a double-column CNC vertical lathe. Here are some key points:

1. Preparation work before equipment operation:

Perform necessary preheating and lubrication on the double-column CNC vertical lathe equipment to ensure that each component and related accessories are in normal condition.

Check whether all parts of the double-column CNC vertical lathe are intact, especially whether the claws and workpieces are clamped.

2. Safety measures when using equipment:

Double-column CNC vertical lathe correctly wear labor protection equipment, such as protective glasses, gloves, etc., to avoid personal injuries caused by misoperation.

Strictly follow the double-column CNC vertical lathe operating procedures and standardized procedures, and do not change processing parameters or operating procedures without permission.

During the operation of the double-column CNC vertical lathe, you must remain alert and comply with operating procedures and safe operating standards.

It is prohibited to perform other operations on the work surface of the double-column CNC vertical lathe, such as hammering to correct the workpiece, welding the workpiece, etc.

3. Equipment maintenance and upkeep:

Double-column CNC vertical lathes undergo regular equipment maintenance and repairs to ensure the normal operation of the equipment and extend its service life.

Pay attention to the cleanliness and hygiene of materials when using double-column CNC vertical lathes to avoid contamination by debris and damage to equipment.

The double-column CNC vertical lathe must be idle for a period of time before work every day to check whether the equipment is normal before use.

4. Special precautions:

The double-column CNC vertical lathe must be stopped when changing speed or measuring workpieces to prevent accidents.

For double-column CNC vertical lathes, pay attention to whether the moving parts have entered the extreme position and whether each limit switch is reliable.

During turning, the double-column CNC vertical lathe is not allowed to stop when the tool has not exited or the feed has not stopped.

If a double-column CNC vertical lathe finds abnormal sounds when the workbench rotates, or when processing heavy workpieces, the floating amount of the workbench should be measured in time and controlled within the specified range.

Before lifting the workpiece on the double-column CNC vertical lathe, the oil pump motor should be stopped first to avoid a sudden increase in oil pressure when the workpiece is not being lifted smoothly and damage the feedback valve pressure gauge.

Two people must cooperate with each other when operating a double-column CNC vertical lathe. No one is allowed to stand on the chuck in front of the lathe to avoid danger.

Before using the double-column CNC vertical lathe, check whether each guide rail is clean and lubricate it to avoid straining the guide rails and seizing them.

Following the above precautions can ensure the safe and efficient operation of the double-column CNC vertical lathe while protecting the safety of operators. In actual operation, you should also further understand and master the relevant operation and maintenance requirements according to the specific machine tool model and manufacturer's instructions.