Installation environment of horizontal machining center: should be installed away from the source of the earthquake, away from direct sunlight, no thermal radiation and humidity. If there is a seismic source near the installation site of the horizontal machining center, a seismic groove should be set around the horizontal machining center.

Strict control of current: the processing workshop is generally installed with horizontal machining centers, and there are many mechanical equipment in the processing workshop, which inevitably leads to large fluctuations in the power grid. Therefore, the installation position of the horizontal machining center must strictly control the voltage and current of the power supply, the voltage and current of the power supply must be controlled within the allowable range of the horizontal machining center, and the voltage and current of the power supply must remain stable, otherwise it will directly affect the normal operation of the machining center.

Temperature and humidity directly affect horizontal machining centers: generally only in an environment below 30 degrees Celsius can the machining center work properly. Generally, exhaust fans and air coolers are installed in the distribution box of horizontal machining centers to ensure constant temperature work of electronic components and central processing units.