The double-column CNC vertical lathe is a high-precision machine tool that can be used to manufacture various workpieces. During use, the workbench base is one of the important components. It directly affects the stability and accuracy of the entire machine, so it is also prone to various problems. Below we will specifically analyze the possible problems that may occur with the base of the double-column CNC vertical lathe workbench.
1. Improper selection of base material
The base material needs to have sufficient strength, rigidity and wear resistance to withstand the vibration and impact generated during machine processing. If the material quality is not good, base deformation and wear may easily occur. Therefore, you need to pay attention to choosing high-quality materials when purchasing a machine.
2. Failure of the base suspension device
The base suspension device is an important support structure that carries the entire machine. If it fails, it will cause problems such as machine instability, loud noise, and reduced accuracy. Therefore, it is necessary to conduct regular inspection and maintenance of the base suspension device to detect and repair faults in time.
3. Lack of protective measures for the base
During use, the machine will inevitably be affected by external factors such as incoming and outgoing materials. If the base lacks protective measures, the internal parts of the machine will be easily damaged. Therefore, it is very necessary to install base protection devices.
4. The support point of the base is unstable
Instability of the support point of the base is also a common problem, which will cause the base to swing or shift, affecting the processing accuracy of the machine, and even destroying the stability of the entire machine. In order to avoid this problem, reasonable support structures and stable installation methods need to be adopted.
In short, the base is an important part of the double-column CNC vertical lathe, and its stability and accuracy directly affect the processing quality of the machine. During use, it is necessary to strengthen the inspection and maintenance of the base and deal with problems in a timely manner to ensure the stability and long-term use of the machine.