CNC machining center is a high-precision, high-speed processing equipment with a wide range of applications, covering aviation, machinery, electronics, medical equipment and other fields. As CNC machining centers are used more and more widely, its cleaning work is also particularly important. This article aims to introduce the key parts of cleaning work in CNC machining centers.
1. Processing room cleaning
The processing room is the core part of the CNC machining center, which contains various mechanical parts and control circuit boards. Therefore, the cleaning of the processing room is very important. The cleaning of the processing room can mainly start from the following aspects:
(1) Remove dust and oil on the surface of the machine tool: During the processing process, the surface of the machine tool is often covered with a layer of dust and oil. These dust and oil accumulate over a long period of time and will have a great impact on the machining accuracy and quality. Therefore, it is very necessary to clean the machine surface regularly.
(2) Clean tool magazine: The tool magazine is an important part of the CNC machining center. It provides different types of tools, so it needs to be cleaned and maintained frequently to ensure its normal operation.
(3) Maintain lighting facilities: The work area of the machining center requires bright lights. Clear sight will make processing more accurate. Therefore, the cleaning and maintenance of lighting facilities are also necessary.
2. Coolant cleaning
The coolant of CNC machining center is an important factor in ensuring processing quality and work efficiency. However, during the machining process, the coolant will be subject to various contaminations, such as iron filings, grease, bacteria, etc. These contaminations will continue to accumulate, causing the quality of the coolant to deteriorate, affecting the processing quality and machine life. Therefore, cleaning the coolant is also the focus of CNC machining center cleaning work. Pay attention to the following aspects when cleaning coolant regularly:
(1) Regularly replace the coolant: Replacing the coolant can thoroughly clean the contaminants in the liquid.
(2) Clean the coolant filter regularly: The coolant filter is an important part of cleaning the coolant. Regular cleaning can effectively remove impurities in the filter.
(3) Add bactericide: Bactericide can effectively kill bacteria and viruses in the liquid and ensure the quality and cleanliness of the coolant.
3. Electrical equipment cleaning
In CNC machining centers, electrical equipment is a very important component, including control circuit boards, cables, and plugs. As the use time increases, these electrical equipment will continue to be contaminated by dust and grease, and these contaminations will affect the normal operation and service life of the equipment. Therefore, it is very important to clean and maintain electrical equipment regularly. Electrical equipment cleaning can be carried out from the following aspects:
(1) Clean the circuit board: The circuit board is the core part of the CNC machining center, which controls all parts of the machine. Therefore, cleaning the circuit board can ensure the normal operation of the machining center.
(2) Clean cables and plugs: Cables and plugs are the connectors of the machine and are usually located in relatively difficult to clean places. However, it is also very important to clean these parts, especially those in contact with oil.
In short, the cleaning work of CNC machining center is an important part of machine maintenance. Only by ensuring cleanliness and hygiene can the machine maintain good working condition and service life. I hope that when using a CNC machining center, we can pay attention to cleaning and maintenance work to ensure the efficient operation and processing accuracy of the machine.