We can provide you with general CNC vertical lathe operating procedures. The following are the general steps for basic CNC vertical lathe operating procedures:

1. Start-up preparation: Make sure the power supply of the CNC vertical lathe and its supporting equipment is normal and the connection is stable. Follow the requirements of the equipment operation manual to start the equipment and bring the equipment into normal working condition.
2. Clamp the workpiece: According to the processing requirements, select a suitable fixture to fix the workpiece to be processed on the spindle of the CNC vertical lathe and clamp it. Ensure that the workpiece is firmly clamped and positioned accurately.
3. Tool preparation: Select the appropriate cutting tool according to the processing technology and workpiece requirements, and install it according to the tool preparation procedures. Make sure the tool is securely fastened and positioned correctly.
4. Write the processing program: According to the process requirements and processing drawings, use CNC programming software to write the processing program. The program should include tool path, processing parameters, feed speed and other information. Transfer the prepared processing program to the control system of the CNC vertical lathe.
5. Set process parameters: According to processing requirements, set appropriate process parameters in the CNC system, including cutting speed, feed rate, cutting depth, etc. Make sure the parameter settings are correct and meet the process requirements.
6. Operate the CNC system: According to the operation interface of the CNC system, input and confirm the corresponding operation instructions. Including loading the processing program, viewing the program path, setting the processing origin, etc.
7. Operation monitoring: During the processing, carefully observe the running status of the CNC vertical lathe, and check whether the cutting process is normal. Pay special attention to conditions such as tool paths, workholding, and cutting conditions.
8. Completion of processing and unloading of the workpiece: After the processing program is completed, stop the operation of the CNC vertical lathe. Pay attention to safe operations and safely unload the processed workpieces as required.
9. Arranging and cleaning: After finishing the processing, arrange and clean the CNC vertical lathe and its surroundings. Clean up cutting chips, lubricating fluid and other debris to keep the machine tool and working environment clean.

This is an overview of basic CNC vertical lathe operating procedures and may sometimes vary based on different CNC vertical lathe and machining requirements. During actual operation, the equipment operation manual and safety regulations need to be strictly followed to ensure the safety of personnel and equipment and to obtain high-quality processing results.