CNC vertical lathe is a commonly used process method in mechanical processing. With the development of science and technology, CNC vertical lathe has become an indispensable part of modern manufacturing industry. However, in production practice, some problems may sometimes occur. Next, we will introduce common problems and solutions to CNC vertical lathes.

1. The problem that the size of the processed parts does not meet the requirements

During CNC vertical lathe processing, if the size of the processed parts does not meet the actual requirements, the requirements can usually be met by adjusting the processing parameters and technology. For example: readjust the tool selection and processing speed according to actual requirements, and spray coolant appropriately according to the actual situation.

2. Problems with unqualified processing quality

In terms of CNC machining, machining quality is a very important aspect. If the machining quality is unqualified, problems will occur in the entire production process. Normally, we can control processing quality problems by reducing the feed speed, etc., but we must pay attention to maintaining a balance of processing parameters.

3. The problem of uneven feed amount

During the machining process, sometimes the feed amount is uneven. Normally, in this case, the average feed amount can be calculated, and then the feed amount can be readjusted based on the average to achieve the best feed rate. uniform effect.

4. Chip removal problem

During the machining process, chip removal is very critical. If the chips are not removed in time, the speed and quality of the machining will be affected. For this kind of problem, we can usually use high-pressure water guns or air blowing to remove chips. At the same time, attention should also be paid to the supply of cutting fluid to ensure an adequate supply of cutting fluid.

5. Problems caused by program errors

In CNC machining, program errors are easy to occur. If the program is incorrect, it will lead to unqualified processing quality and thus affect the entire production process. To solve this problem, we need to write the program correctly and pay attention to the checking and testing of the program.

In short, common problems and solutions to CNC vertical lathes are very important. Only by ensuring the stability and quality of CNC machining can we ensure production consistency and improve production efficiency and economic benefits.