CNC vertical lathe is an indispensable piece of equipment in modern mechanical processing, and its efficient and precise processing capabilities are widely welcomed. However, in daily use, the cleaning work of the CNC vertical lathe also needs attention. This article will introduce to you how to clean the CNC vertical lathe to ensure its normal operation and extend its service life.

1. Clean chips and liquid dirt

During the process of machine tool processing, chips and liquid dirt generated by cutting will adhere to the machine tool working surface, rails, etc., thus affecting the processing quality and operating stability of the CNC vertical lathe. Therefore, cleaning up cutting oil and debris is the primary task of daily maintenance. The first is the processing area above the machine tool, which can be cleaned with a vacuum cleaner or high-pressure air gun. Then there is the cleaning of the work surface, which requires the use of special rubber scrapers, cleaning agents, brushes and other tools for thorough cleaning. In addition, attention should be paid to cleaning all hydraulic systems, lubrication systems and pneumatic systems from liquid dirt.

2. Clean the drag chain and guide rails

Drag chains and guide rails are the main components of CNC vertical lathes, so their cleaning is also crucial. During production and processing, various chips and oil stains will accumulate on the guide rails and iron chains, and will be scattered with lateral movement, affecting the service life. For cleaning the guide rails, you can use special guide rail scrapers, cleaning agents and brushes for thorough cleaning. The drag chain is cleaned manually using a wiper and cleaning agent.

3. Clean the electrical box

The electrical box is the electronic control part of the CNC vertical lathe, so its normal operation and safety largely depend on the cleaning of the electrical box. During production and processing, due to the failure of the switch of the electrical box and the abnormal operation of the machine tool, oil and sediment will be generated in the electrical box to block the channel, affecting its normal operation. Therefore, it is particularly important to check and clean the electrical box regularly. When cleaning, you need to turn off the power first and use a wipe or compressed air to remove internal debris.

The normal use of CNC vertical lathes is a very important production method in the machinery manufacturing industry, but its cleaning and maintenance are equally important. Cleaning tools, compressed air, detergents, scrapers and brushes are all essential tools. Correct and effective cleaning can extend the life of machine tools, improve processing efficiency and quality, save energy costs and reduce daily maintenance costs.