The maintenance of CNC vertical lathe is a systematic work, which involves the daily cleaning, lubrication, inspection and maintenance of CNC system of the machine. The following are some specific maintenance steps and precautions:

1. Maintenance before work:

The CNC vertical lathe will inspect the machine in accordance with the daily inspection requirements to confirm whether there are any problems.

Wipe the rails to ensure they are clean.

Check the oil volume in the oil cup and oil window to confirm whether the oil volume is sufficient and whether the oil level is within the specified range. If the oil volume is insufficient, it should be replenished in time. If there is deterioration, it should be replaced in time.

Before starting the machine, let the machine run at low speed for 2 to 3 minutes, and conduct horizontal and vertical tool feed tests to check whether the transmission parts are operating normally.

2. Maintenance in class:

Observe whether there are any abnormalities in the operation of the CNC vertical lathe, whether the instrument display is normal, and whether the lubrication condition of the machine is good. If there are any problems, they should be solved in time to avoid working with the machine sick.

3. After-work maintenance:

Clean the iron chips and other debris on the CNC vertical lathe, and wipe all parts of the CNC vertical lathe to ensure that the surface of the CNC vertical lathe is clean.

Clean the tools, measuring tools, etc. used in CNC vertical lathes.

Carry out lubrication work on the CNC vertical lathe to ensure good lubrication.

4. CNC system maintenance:

Formulate CNC vertical lathe operating procedures and daily maintenance rules and regulations, and strictly implement them.

CNC vertical lathes should minimize the number of openings of CNC cabinets and high-voltage cabinets to prevent dust from entering.

CNC vertical lathes regularly clean the heat dissipation and ventilation system of the CNC cabinet to ensure its normal operation.

Perform regular maintenance on the input/output devices of the CNC vertical lathe CNC system to ensure correct signal transmission.

CNC vertical lathes often monitor the grid voltage of the CNC system to ensure that it is within the normal range.

Regularly inspect and replace CNC vertical lathe motor brushes to prevent excessive wear.

CNC vertical lathes regularly replace the memory battery to prevent data loss.

When the CNC vertical lathe CNC system is not used for a long time, it should be powered on regularly to prevent components from being damaged by moisture.

The CNC vertical lathe spare circuit board is regularly installed into the CNC system and energized for a period of time to prevent damage.

5. Other matters needing attention:

When starting up the CNC vertical lathe every day, pay attention to whether the starting load changes of each axis of the CNC vertical lathe are normal. If there is any abnormality, stop the machine immediately for inspection.

Pay attention to the normal consumption of CNC vertical lathe lubricating oil. If it is too much or too little, check it in time.

Regularly clean the air conditioning filter and vent filter of the electrical box of the CNC vertical lathe to prevent dust containing iron powder from causing machine tool alarms.

These steps and precautions can help you effectively maintain and maintain the CNC vertical lathe, ensuring its stable operation and extending its service life. However, the specific maintenance work of CNC vertical lathes may vary depending on the machine tool model, usage conditions and other factors. Therefore, it is recommended that you refer to the machine tool's operation manual or consult a professional machine tool maintenance personnel for more detailed and accurate maintenance guidance.