The maintenance of CNC vertical lathe is the key to ensure its normal operation and extend its service life. The following are some key points about CNC vertical lathe maintenance:

1. Electrical component maintenance:

Regularly check whether the wiring of the electrical components of the CNC vertical lathe is firm to avoid looseness or short circuit.

CNC vertical lathes use measuring tools for inspection to ensure that the accuracy of the machine tool is normal.

2. Tool maintenance:

Regularly check the wear of CNC vertical turning tools and replace seriously worn tools in a timely manner.

CNC vertical lathe maintains the dimensional and shape accuracy of the tool and ensures the quality of the processed workpiece.

3. Protective measures:

Protective glasses and gloves should be worn when operating CNC vertical lathes to prevent injuries from splashes or cutting.

Keep the area around the CNC vertical lathe clean and tidy to prevent foreign matter from entering the inside of the machine tool.

4. Regular maintenance:

Develop and implement maintenance plans, including cleaning, lubrication, tightening screws, etc.

Avoid hitting with hard objects when cleaning to avoid damaging the machine tool.

5. Lubrication system maintenance:

CNC vertical lathes regularly maintain and repair the lubrication system and replace the corresponding lubricant types.

Regularly check CNC vertical lathe lubricants, working fluids, etc. to ensure they are sufficient and clean.

6. Electrical system maintenance:

Regularly check whether the electrical equipment of the CNC vertical lathe is in close contact and the insulation is good.

When the electrical components of the CNC vertical lathe are found to be overheated or damaged, they should be replaced in time.

7. CNC system maintenance:

Try not to open the doors of CNC panels and powerful electrical panels to prevent dust and metal powder from entering.

Clean the cooling and ventilation system of the CNC vertical lathe CNC panel regularly and check whether the pipe filter is blocked.

CNC vertical lathes regularly replace storage batteries to ensure the normal operation of the CNC system.

8. Spare circuit board maintenance:

For CNC vertical lathes, spare printed circuit boards that have not been used for a long time should be regularly put into the CNC system and powered on to prevent damage.

9. Maintenance of machine tool mechanical parts:

After each shift of CNC vertical lathe processing, clean up the chips scattered on the carriage, guide rails, etc.

Check whether the chip conveyor of the CNC vertical lathe is working properly to avoid chip accumulation and damage to the accuracy of the guide rail.

Before the CNC vertical lathe work is completed, return each servo axis to the origin and then stop the machine.

In addition, if economic conditions permit, CNC lathes should be installed isolated from ordinary mechanical processing equipment to facilitate repair and maintenance. At the same time, machine tools that have been out of service for a long time should be started and run for a period of time every month to extend the service life of the CNC machine tool.

In general, the maintenance of CNC vertical lathes involves many aspects and requires comprehensive consideration of all parts of the machine tool. Through regular and standardized maintenance, the normal operation of the CNC vertical lathe can be ensured, the processing efficiency can be improved, and its service life can be extended.