A vertical lathe is a common metalworking tool that enables efficient turning of metal or other hard materials. Lubrication is very important when lathe processing is performed. Lubricating oil can not only improve the processing efficiency of lathes, but also extend the service life of equipment. For vertical lathes, the correct lubrication methods are as follows:

1. Select the appropriate hydraulic oil

Grease and hydraulic oil are essential during the unloading process on the lathe. Hydraulic oil should be of good quality and free of impurities to ensure the normal operation of the machine.

2. Add lubricating oil in time

Adding lubricating oil helps reduce parts wear, improve processing efficiency, and ensure equipment service life. Therefore, during use of the lathe, lubricating oil must be added in time.

3. Pay attention to the location of lubrication

When performing lathe processing, it is necessary to pay attention to whether the position and nozzle of the lubricating oil are normal. If there are any abnormalities, they should be dealt with in time.

4.Replace hydraulic oil regularly

After the hydraulic oil is used for a period of time, its performance will gradually deteriorate, so it needs to be replaced regularly.

In short, proper lubrication is an important part of ensuring the normal operation of the lathe. Maintaining reasonable maintenance and upkeep of the lathe will also be of great help to the overall performance of the equipment.