CNC machine tool oil cooler is an efficient and reliable cooling equipment, widely used in CNC machine tools and other fields. It can provide a stable cooling effect, ensure the temperature stability of CNC machine tools during processing, improve processing accuracy and extend the service life of equipment.

Using a CNC machine tool oil cooler is very simple, just follow these steps:

1. Connect the power supply and air source: Connect the power supply and air source of the oil cooler to the corresponding interfaces to ensure that the connection is firm and reliable.

2. Adjust the temperature: Adjust the temperature of the oil cooler as needed, generally set at around 25°C. When adjusting the temperature, be careful not to make it too high or too low to avoid affecting the cooling effect.

3. Start the oil cooler: Press the start button and the oil cooler starts working. At this time, the cooling oil begins to circulate and provide cooling effect for the CNC machine tool.

4. Check the cooling effect: The cooling effect should be checked regularly during use. If the temperature is found to be too high or the cooling effect is poor, the temperature should be adjusted in time or the working status of the oil cooler should be checked.

5. Turn off the oil cooler: After processing is completed, press the stop button and the oil cooler will stop working. At this time, the power and gas source should be disconnected to ensure safety.

The following points should be noted when using CNC machine tool oil coolers:

1. Make sure the power and air sources are connected correctly to avoid accidents.

2. Adjust the temperature gradually to avoid excessive temperature fluctuations that may affect the cooling effect.

3. The filter of the oil cooler should be checked regularly during use. If it is found to be clogged, it should be cleaned or replaced in time.

4. Avoid using the oil cooler in environments with flammable, explosive and other dangerous goods.

5. If any abnormality is found during use, stop the machine immediately for inspection and contact professionals for repair.