As a high-precision CNC processing equipment, CNC vertical lathe is widely used in the field of mechanical processing. Before using the CNC vertical lathe, you need to pay attention to some startup sequences to ensure the normal and stable operation of the equipment. The following is the startup sequence of CNC vertical lathe:

1. Confirm that the power supply is normal: Before turning on the device, you must ensure that the device receives a stable power supply. Check whether the power supply voltage meets the requirements and ensure that the power connector is firm and reliable.

2. Turn on the main power supply of the equipment: The first step to start the CNC vertical lathe is to turn on the main power switch. At this point, you should hear some sounds inside the machine or see the power light turn on.

3. Enter the system password: After the main power supply of the equipment is turned on, the CNC vertical lathe will automatically run the processing system. At this time, you need to enter the system password and perform identity verification before further operation.

4. Check the status of the machine tool manipulator and fixture: After verifying the normal operation of the processing system, check whether the machine tool manipulator and fixture status of the equipment are correct.

5. Carry out system calibration: CNC vertical lathe needs to perform some initialization and system calibration work during operation, including coordinate system, tool, workpiece, etc. These operations will determine subsequent processing accuracy.

6. Select the processing program: After the system calibration is completed, you need to select the corresponding processing program. This program will specify parameters such as tool, speed and depth for drilling, milling, planing and other processes.

7. Start processing: After the equipment preheating and system calibration are completed, the processing operation can be started. During the processing, operating procedures need to be strictly followed to ensure safety and quality.

By operating the CNC vertical lathe according to the above startup sequence, the normal and stable operation of the equipment can be ensured. Precautions include strictly abiding by the operating procedures of the machine tool and performing equipment maintenance in a timely manner. Before processing, it is necessary to confirm that the workpiece and tool settings are correct to ensure processing quality.