The lubrication system maintenance of CNC vertical lathe is very important, it can ensure the normal operation of various parts of the machine tool and prolong the service life of the machine tool. The following are some common precautions for maintenance of CNC vertical lathe lubrication system:

1. Regularly check the lubrication system: Regularly check the working status of the lubrication system, including the oil level, oil quality and cleanliness of the filter element. Ensure the normal operation of the lubrication system, and replace the used lubricating oil and filter elements in time.
2. Grease maintenance: For components equipped with grease, such as bearings and guide rails, it is necessary to check the addition of grease. Regularly clean the grease filling port, and add an appropriate amount of grease in accordance with the specified standards to maintain sufficient grease and normal work.
3. Clean the lubrication system: Regularly clean the inside of the lubrication system, including fuel tanks, pipes, filter elements and other components. Ensure that there is no accumulation of foreign matter and dirt to prevent blockage and affect the normal operation of the lubrication system.
4. Check the lubrication pipeline: regularly check the connection and sealing performance of the lubrication pipeline. Ensure that lubricating oil or grease can be supplied to each lubricating point smoothly, check whether there is any oil leakage or leakage, and deal with it in time.
5. Maintenance of lubrication unit: If the CNC vertical lathe is equipped with a lubrication unit, it needs to be maintained and maintained. Regularly check the working status of the lubricating unit and the use of lubricating oil to ensure that the lubricating unit can supply lubricating oil normally, and replace the used lubricating oil in time.
6. Follow the manufacturer's recommendations: Strictly follow the manufacturer's lubrication maintenance recommendations and operating manuals, and perform lubrication system maintenance according to the specified maintenance cycle and methods. Different types of CNC vertical lathes may have different lubrication requirements, so make sure to follow the correct method for maintenance.
7. Training operators: Train operators of CNC vertical lathes, let them understand the basic principles and maintenance methods of the lubrication system, learn to observe and check the working status of the lubrication system, and be able to deal with possible problems in the lubrication system in time.

Regular lubrication system maintenance can ensure the normal operation of the CNC vertical lathe and improve the reliability of the machine tool. At the same time, pay attention to timely replacement of lubricating oil and filter elements, use appropriate lubricating grease, and maintain according to the manufacturer's recommendations to improve the service life and performance of the machine tool.