Vertical lathe failure problems and processing problems?
2023-10-30 07:27:44

The vertical lathe is a commonly used machine tool equipment widely used in various mechanical processing industries. However, there are also some malfunction problems during the use of vertical lathes. These problems will not only cause interruption of the production process, but may also affect the processing quality. Therefore, it is very important to understand and solve the fault problems of vertical lathes in time.

First of all, one of the common malfunctions of vertical lathes is problems with the lubrication system. The lubrication system is an important part of the machine tool equipment, which can ensure the smooth operation and life of the machine. If there are problems in the lubrication system, such as insufficient lubricating oil or contamination, it will cause increased friction in the machine, which will increase heat and accelerate the wear of parts, leading to machine failure and production line interruption. Therefore, it is crucial to promptly check and maintain the lubrication system of the vertical lathe.

Secondly, problems existing in the processing process of vertical lathes will also affect the processing quality. For example, if there is an abnormality in the cutting fluid circulation system during machining, it will lead to insufficient or excessive cutting fluid, affecting tool life and processing quality. In addition, during long-term use of machine tool equipment, problems such as tool breakage and tool handle damage or deformation are prone to occur, which directly affects processing accuracy and efficiency.

Finally, you need to pay attention to the following aspects when using a vertical lathe:

1. Daily maintenance. Regularly check the oil circuit, cooling water circuit, electrical system and other components of the vertical lathe, and promptly perform maintenance by cleaning, replacing, etc. when abnormal conditions are found.

2. Standardize operations. When using a vertical lathe, staff must operate in accordance with the operating procedures and strictly follow the operating procedures to avoid damage to the machine tool equipment.

3. Maintain it carefully. When installing a vertical lathe, you need to pay attention to the surrounding environment and ventilation conditions, and you need to clean the machine tool shell regularly to ensure that the internal equipment is clean.

Understanding the possible malfunctions and processing problems of vertical lathes, and doing a good job in maintenance and operation can effectively avoid machine failures and production line interruptions, improve processing quality and efficiency, and achieve production goals.

RELATED NEWS