1. The vertical machining center can complete milling, boring, drilling, tapping and cutting threads.

2. Vertical machining center refers to the machining center with the spindle axis and the table set straight, which is mainly suitable for processing plates, discs, molds and small shells and complex parts.

3. Vertical machining centers are less three-axis two-linkage, which can usually complete three-axis three-linkage. Some can be controlled by five or six axes.

4. The cooling conditions of the vertical machining center are easy to establish, and the cutting fluid can directly reach the tool and the machining surface; The three axes conform to the Cartesian coordinate system
, the feeling is intuitive and consistent with the perspective of the drawing, and the chips are easy to remove and fall, avoiding scratching the processed surface. Compared with the corresponding horizontal machining center, the structure is simple, the footprint is small, and the cost is lower.

5. The height of the column of the vertical machining center is limited, and the processing range of the box workpiece should be reduced, which is the disadvantage of the vertical machining center. But the vertical machining center workpiece is loaded
Easy clamping and positioning; The motion trajectory of the cutting tool is easy to observe, and the debugging program is convenient to view and measure, and the problem can be found in time and shut down or modified.