CNC vertical lathe is an advanced processing technology commonly used in the field of machinery manufacturing. For CNC vertical lathes, the use environment is very critical. Because accuracy and efficiency can only be guaranteed in a suitable environment. If the use environment is not suitable, the expected processing effect cannot be achieved. So what are the requirements for the use environment of CNC vertical lathes? Let’s explore it below.

First of all, CNC vertical lathes have very high requirements for temperature and humidity. Obviously, any mechanical equipment will be affected by changes in the environment. For CNC vertical lathes, especially in high temperature and humid environments, the accuracy and life of the machine will be greatly affected. Therefore, when using a CNC vertical lathe, you must ensure that the temperature and humidity of the working environment are within a suitable range. Only in this way can the normal operation and efficient processing of the machine be guaranteed.

Secondly, CNC vertical lathes are also very sensitive to the effects of vibration. When using a CNC vertical lathe, any slight vibration may cause damage to the accuracy of the machine, thereby affecting the processing quality. Therefore, when using a CNC vertical lathe, external interference must be reduced as much as possible to ensure the stability and accuracy of the machine. In addition, machine parts need to be inspected regularly and maintained and replaced in a timely manner to ensure the normal operation of the machine.

Finally, CNC vertical lathes also have high requirements for the quality and stability of power supply. Because during the processing process, the machine needs to consume a lot of electricity. If the power supply is unstable or the circuit is aged, it will cause the machine to fail to operate normally, and may even cause damage to parts and the machine as a whole. Therefore, when using CNC vertical lathes, the quality and stability of power supply must be ensured, especially in areas with unstable power supply quality, and corresponding measures should be taken.

In short, CNC vertical lathe is a very efficient and high-precision processing technology. However, the requirements for the use environment are also very high. Only in an environment that meets the requirements can the normal operation and efficient processing of the machine be guaranteed. Therefore, environmental factors must be carefully considered when using CNC vertical lathes, and corresponding measures must be taken to adjust and optimize the use environment.