CNC vertical lathe is one of the high-precision CNC equipment widely used in modern mechanical processing industry. However, during use, many users may encounter the problem of spindle motor burning, which poses a considerable threat to the normal operation of the equipment. So, what exactly causes this situation to occur?
1.Quality issues
CNC machine tools are precision equipment, and their key components require high-precision manufacturing and processing, otherwise they will cause malfunctions due to insufficient precision. And some manufacturers that do not have the ability to process high-precision parts will not have very good quality CNC machine tools. Therefore, if the origin of the CNC vertical lathe purchased is unknown or the quality cannot be guaranteed, the spindle motor may burn due to defects in the equipment's parts.
2. Aging of parts
The service life of any equipment has a limit. After this period, the equipment will experience aging, loss, wear and tear, which will affect the function and performance of the equipment. The spindle motor of a CNC vertical lathe is a key component. The longer it is used, the more likely its parts will be aged and damaged, eventually leading to burnout. Therefore, it is very important to pay attention to maintenance and timely replacement of aging parts in the equipment.
3. The load is too large
The load and speed of the CNC vertical lathe interact with each other when working. If the load is too large, the load of the spindle motor will be overloaded, generating a current that exceeds the bearing capacity of the spindle motor, causing it to overheat and burn out, thus affecting the normal use of the equipment. Therefore, when using a CNC vertical lathe, the operator should understand the load of the equipment and reasonably control its load to ensure the durability of the equipment.
4. Electrical failure
When using CNC machine tools, electrical system failures may also cause the spindle motor to burn out, such as circuit damage, poor wiring, short circuit, etc., which may cause excessive current and burn the spindle motor.
In short, when using a CNC vertical lathe, in order to avoid the burnout of the spindle motor, it is necessary to pay attention to the care and maintenance of the equipment, pay attention to selecting high-quality equipment, reasonably control the load of the equipment, strengthen protective measures for the equipment, and timely detect and handle In the event of electrical failure, only by protecting key components in the equipment can we effectively reduce the failure rate, increase the service life of the equipment, and provide strong support and assistance for the efficient operation of production.