CNC vertical lathe is a widely used mechanical processing method. It can automatically control the workbench, fixture, tool holder, etc. during the processing process to complete complex processing tasks. So, what is the working process of CNC vertical lathe?

The working process of CNC vertical lathe can be divided into the following steps:

1. Preparation work: First, you need to prepare the workpiece and CNC vertical lathe, including the workpiece material, specifications, drawings and other relevant information, as well as CNC vertical lathe parameter settings, tool installation, fixture adjustment, etc.

2. Processing preparation: Before processing, the machine tool needs to be adjusted and prepared. Including vibration detection, fixture preload test, tool length detection, etc.

3. Program input: According to the processing requirements of the workpiece, write the corresponding G code program and input it into the CNC vertical lathe system through U disk or other methods.

4. Processing process: After starting the CNC vertical lathe system, the system will automatically perform processing operations according to the input G code program. During the processing, according to the instructions of the program, the CNC vertical lathe will automatically adjust the workbench, fixture, tool rest and other equipment to complete the processing.

5. Processing inspection: After processing, inspection and trimming work need to be carried out to ensure that the processing quality meets the requirements. At the same time, the machine tools must be cleaned and maintained.

It can be seen that the working process of CNC vertical lathe is more automated and refined than the traditional mechanical processing process, and its processing efficiency and processing quality have also been greatly improved. Through understanding the above content, I believe that everyone has an in-depth understanding of the working process of CNC vertical lathe.