Vertical machining center refers to the spindle for vertical condition of the machining center, its structural form is mostly fixed column, the table is rectangular, no indexing rotation function, suitable for processing plates, sets, plate parts, it generally has three linear motion coordinate axes, and can be installed on the table along the horizontal axis rotation rotary table to process spiral parts. What are the preparation tasks for vertical machining centers? The following machining center manufacturers tell you:

(1) The tools used for inspection should comply with the standards allowed by the machine tool.

(2) Tool length, tool component, and total tool weight do not exceed the specified value.

(3) Check whether the tools used have any wear and damage that affect the application, and sometimes replace them immediately.

(4) Some moving parts are lubricated with grease, and before operation, pay attention to check whether the machine tool has reached the time specified on the lubrication instruction sign, and should make up for it in time when it has arrived.

(5) Check whether there are any obstructions around the machinery and control system.

(6) Check whether each control system is turned off.

(7) Check whether the control switches are in good condition.

(8) Check if there is a person in the mechanical danger zone.

(9) Check again whether the workpiece is firmly clamped on the work table.