CNC vertical lathe is an efficient mechanical processing equipment. It has many advantages such as automated operation, high-speed precision processing, and multi-channel program control. However, before using a CNC vertical lathe for processing, the operator should perform inspections to ensure the normal operation of the equipment, maintain operator safety, and improve processing efficiency. Today, let’s take a look at which parts should be checked before using a CNC vertical lathe.
1. Electrical system: The operator should check the power supply of the electrical system of the CNC vertical lathe to see if there are any loose or poorly contacted electronic components, such as relays, switches, transformers, etc. Also check whether the ground wire is firmly connected and whether the cable is intact to prevent short circuit or leakage.
2. Hydraulic system: The hydraulic system is a key part of the CNC vertical lathe. In order to ensure the stability and accuracy during the processing, the operator needs to check whether the oil in the hydraulic system is sufficient, whether the oil is full, and every hydraulic detail. sealing performance. At the same time, it is also necessary to check whether the oil temperature and pressure are reasonable to ensure the normal operation of the hydraulic system.
3. Machine tool part: The machine tool part is the core part of the workpiece processing. The operator should check whether all parts of the CNC vertical lathe are flexible and reliable, such as the clamping arm, workbench, spindle, fixture, etc. The moving parts must be fully lubricated and free from abnormal noise and vibration.
4. Control system: The CNC vertical lathe control system includes hardware circuits and software programs. The operator should check whether the control system software is loaded correctly, whether the hardware is in good contact, and whether the input and output devices are available. During the processing process, the correctness and completeness of various procedures need to be checked multiple times to prevent processing errors.
5. Safety protection: CNC machine tools move very fast during processing, so safety protection is very necessary. Operators should check that safety doors, emergency stop buttons, light curtains and safety sensors are intact. Operators should also pay attention to labor safety and wear protective gloves, goggles, etc.
Through the inspection of the above parts, ensuring that the CNC vertical lathe is in good condition before use will not only help ensure the personal safety of the operator, but also improve production efficiency and processing accuracy. Therefore, when using a CNC vertical lathe, the operator must carefully check all parts of the equipment to ensure the smooth progress of the entire processing process.