Cleaning the CNC vertical lathe is an important measure to maintain the performance and normal operation of the machine tool. The following are several common methods of cleaning CNC vertical lathe:

1. Daily wiping: Use a soft cloth or a special machine cleaning cloth for daily wiping to remove dust and dirt on the surface of the machine and keep the machine clean.
2. Clean the guide rail and lead screw: regularly clean the guide rail and lead screw of the machine tool, spray the cleaner on the surface of the guide rail, and then wipe it with a cloth to ensure the smoothness of the guide rail and the cleanliness of the lead screw. Be careful not to use abrasive cleaners to avoid damage to the guide rail and lead screw.
3. Clean up chips and residues: Chips and residues generated during processing will be deposited inside the machine tool or in the working area. Regularly use a vacuum cleaner or brush to clean these chips and residues, so as not to cause adverse effects on machine parts and processing quality Influence.
4. Clean the coolant system: If the CNC vertical lathe uses coolant for cutting cooling, the coolant system needs to be cleaned regularly, including coolant tanks, filters, cooling pipes, etc. Clean the filter and replace the coolant to ensure the normal circulation and cooling effect of the coolant.
5. Keep the electrical part clean: Regularly check and clean the electrical part of the machine tool, including the inside of the control cabinet and the electrical connection part. Check the cable connection to make sure it is stable and secure. Use a gas cleaner or blower to remove dust and grime from electrical components.
6. Lubrication and maintenance: Lubricate and maintain according to the maintenance manual and operation guide of the machine tool. Regularly check the lubrication system and lubrication points to ensure the sufficiency and quality of lubricating oil, and maintain the normal lubrication state of the machine tool.

Please note that before performing any cleaning operations, always switch off the power to the machine tool and ensure that proper operating procedures and safety regulations are followed. If you are uncertain about the cleaning and maintenance of the machine tool, it is recommended to consult the machine tool manufacturer or professional maintenance personnel for advice.