CNC vertical lathe is a very important CNC equipment that is widely used in various mechanical processing industries, especially in overall processing, sheet metal processing, etc., because it can well improve production efficiency and processing quality. However, although the CNC vertical lathe performs well in production and processing, some users report that it makes a harsh noise when the CNC vertical lathe is stopped. What is the reason? What are the solutions?

First, let’s take a look at the causes of CNC vertical lathe noise. Most CNC vertical lathes make a buzzing sound when stopped. The reason is due to the sound made by the bearings. In mechanical processing, bearings are a very important component, which play a role in withstanding vibration and load. Therefore, when the bearing is damaged, it will cause noise.

Secondly, to solve the noise problem, users need to take some measures. First, check the bearings for damage, looseness, or other abnormalities. If these problems are found, they should be replaced or repaired in time. Secondly, users should also perform regular machine maintenance and clean, lubricate and maintain parts to ensure normal operation of the machine. In addition, processing personnel should also pay attention to avoid excessive vibration and impact during daily processing operations to reduce bearing wear and noise generation.

In general, CNC vertical lathe is a very practical mechanical equipment and is widely used in the processing industry. However, when it makes noise when shut down, it could be the result of damaged or poorly maintained bearings. In order to avoid this situation, processing personnel should check the machine regularly and perform correct maintenance and operation to ensure the normal operation of the machine.