1. Before operation, wear each labor protection product, carry out smooth maintenance according to requirements, and check the oil level of each smooth oil.

2. When clamping the workpiece, it should be handled gently to prevent collision and collision with the work table; When the workpiece is heavy, the load-bearing capacity of the machine tool table should also be verified, and overload operation is not allowed.

3. After the machine tool is started, check whether the movement of the spindle and the working table in all directions and each pressure indicator table is normal, whether there is abnormal noise, etc.

4. The machining program should be checked before running, and the matching of the tool should be confirmed when using the high-speed function.

5. During the processing process, you should always pay attention to whether the movement of the machine tool and the processing state are normal, and encounter abnormal phenomena. When noise and alarms, the processing should be stopped immediately to see the processing, and the processing can continue only after the fault is swept away.

6. After the workpiece is processed, it is necessary to clean the work table, scrub and smooth the machine tool, clean the surrounding hygiene, and keep the place tidy.

7. The control system must be closed before closing the main power supply of the machine tool; Emergency stop switches are not used in non-emergency situations.