After the CNC lathe processing is completed, a series of steps are required to ensure the maintenance of the machine tool and preparation for the next round of processing. Here are some necessary steps:

1. Shutdown and reset: First of all, a reset operation is required before the CNC lathe is stopped to ensure that the machine tool returns to the initial state. Then turn off the main motor and wait until the main motor stops completely before turning off the system switch.

2. Clean the machine tool: Clean the CNC lathe iron filings and other debris to ensure the cleanliness of the machine tool and working area. This helps maintain the accuracy of the machine tool and extend its service life.

3. Add lubricating oil and maintenance: Add lubricating oil according to the CNC lathe lubrication chart, and inspect and lubricate the machine tool guide surface, claws, tailstock, tool rest and other components. At the same time, keep maintenance records to track the maintenance status of machine tools.

4. Close the protective cover and power supply: Close the protective cover of the CNC lathe to ensure the safety of the machine tool. Finally, turn off the power of the machine tool and ensure that the machine tool is completely powered off.

In addition, in order to maintain the stability and accuracy of CNC lathes, regular maintenance and upkeep of machine tools is required, including checking the accuracy of machine tools, replacing worn parts, cleaning and lubricating machine tools, etc. This not only ensures the normal operation of the machine tool, but also improves processing quality and efficiency.

When preparing for the next round of machining, it is necessary to recheck the workpiece clamping situation, adjust the parameters of the CNC system, and make necessary tool changes and adjustments. At the same time, enter the new processing program and carefully check whether the code, address, value, etc. are correct to ensure the smooth progress of the next round of processing.

In short, after the CNC lathe is completed, a series of shutdown, cleaning, maintenance and preparation work are required to ensure the normal operation and processing quality of the machine tool.